Ceramic ball mill ball stone ratio and model and parameters

Ceramic ball mill ball stone ratio

The amount of ball stone added to the ceramic ball mill is generally about 40% of the cylinder volume. In actual production, the amount of steel balls loaded should not exceed 35% to keep the height of the ball from exceeding the center line of the cylinder. At present, the diameter of steel balls on the market is between Φ20mm-Φ125mm (such as 40mm and 60mm for small balls, 80mm for medium balls, and 100mm or 120mm for large balls). The diameter of steel balls used in super large ball mills is Φ130mm-Φ150mm, etc.

The general ceramic ball mill ball stone ratio is as follows: large steel ball: medium steel ball: small steel ball = 4:4:2, that is, 4 parts of large balls, 4 parts of medium balls, and 2 parts of small balls. When adding steel balls, you can only add large balls and medium balls, because as the ball mill continues to run, the ball stones will become smaller and smaller, and then add large steel balls.

Models and parameters of ceramic ball mills

Ceramic ball mills are mainly used for mixing and grinding materials. The finished product has uniform fineness and saves power. It can be dry-milled or wet-milled. The machine can use different liner types according to production needs to meet different needs. The loading capacity is 0.05-15 tons/time. The capacity is very small and is generally suitable for product trial production and intermittent small-batch production.