How to choose the model of 50t/h copper ore ball mill?

Influencing factors of copper ore ball mill selection

Usually, the specifications of the ball mill will be determined according to the following aspects：

1. Ore hardness: The higher the hardness of the ore, the higher the power of the ball mill is required to grind it.Therefore, the hardness of copper ore is essential to the choice of ball mill.

2. Grinding fineness requirements: Different grinding processes have different requirements for grinding fineness.If finer fineness is required, a higher-power ball mill is usually required.

3. Production capacity: The specifications of the ball mill required to process 50 tons of copper ore per hour also depend on the required production capacity.The greater the processing capacity, the higher the power of the ball mill is usually required.

4. Raw material characteristics: consider the physical and chemical properties of the raw materials to be treated, including hardness, humidity, viscosity, abrasion, etc.Different raw material characteristics may require different types or specifications of ball mills to process.

5. Production process requirements: According to the production process flow and requirements, choose the appropriate type of ball mill, including dry ball mill and wet ball mill, as well as ball mill with different structures such as overflow type and lattice type.

6. Factory equipment and layout: The size of the ball mill is also limited by the factory equipment and layout.It is necessary to ensure that the ball mill can be easily installed and maintained, and that it complies with the factory's production process.

Considering the above factors, ball mills that usually process 50 tons of copper ore per hour may be medium- to large-scale equipment with appropriate power and processing capacity to meet production needs.

50 tons/hour copper ore ball mill model recommendation

Φ3.0×9.0m overflow ball mill: This is a common medium-sized ball mill model with a diameter of 3.0 meters and a length of 9.0 meters. It has a large design processing capacity and is suitable for medium-scale production scenarios.

Ф2200×7500 ball mill: This is another common ball mill model with a diameter of 2.2 meters and a length of 7.5 meters. It is usually suitable for small and medium-sized grinding production lines with a processing capacity of about 50 tons per hour.

MQGg3231 ball mill: This is a common ball mill model, suitable for wet grinding, with high processing capacity and stable performance.

Ф1830×3000 ball mill: This is a small ball mill model, suitable for small-scale production scenarios, with a processing capacity of about 50TPH.

Ф2400×4500 ball mill: This is another medium-sized ball mill model with a diameter of 2.4 meters and a length of 4.5 meters, which is suitable for medium-scale grinding production lines.

The above are just some examples of common ball mill models. The actual selection should be considered comprehensively according to production requirements, process requirements and on-site conditions.XKJ GROUP has extensive experience in the production and research and development of ball mills. The copper ore ball mills produced by our FACTORY can save 20% to 30% more energy than ordinary ball mills. The materials are exquisite, strong and wear-resistant. Welcome to consult.