I didn't expect that the crushing effect of the roller sand making machine on river pebbles was satisfactory, and the price was not expensive

Although there are far more machines available in the market for making river pebble sand than roller sand making machines, roller sand making machines have good sand making effects, low operating noise, reliable performance, and affordable prices. Therefore, even if their output is not large, they are still loved by the public! The specific introduction of this type of river pebble roller sand making machine equipment is as follows:

River pebble roller sand making machine

The roller sand making machine, also known as the roller crusher, mainly uses two roller wheels to rotate relative to each other to crush materials for medium and fine sand making. It is a type of small sand making machine. Compared with professional impact sand making machines, it is cheaper in price, smaller in output, lower in operating cost, and faster in cost recovery, making it an ideal choice for many small and medium-sized stone factories. This equipment is suitable for fine crushing operations with ore particles smaller than 30mm. The finished product has a particle size of 2-10mm and is produced at around 5-100 tons per hour. It has excellent performance in handling wet materials, with very low requirements for moisture. The discharge port is not sticky or blocked, and the amount of over crushing is small. The finished product has an excellent particle shape and uniform particle size. In addition, the internal device is equipped with a dust-proof plate, which has excellent sealing, low dust pollution, and low noise. It can meet the requirements of green environmental protection production.

From the above understanding, it can be seen that the price of this roller sand making machine is not very expensive. As for how much does it cost per unit? It also depends on your selection. After all, there is more than one model, and the cost quotation varies depending on the selection, and it also involves the manufacturer's brand. Therefore, it is recommended that customers consult the specific manufacturer based on their actual needs for specific quotations.